Electrical contractors & crews
Wire Buyer in Orlando
Copper and aluminum wire stacking up on the job — feeder cutoffs, demo pull-outs, a tangle of THHN, or a few reels left after a build? Industrial Equipment Buyer is a direct wire buyer in Orlando. We buy your insulated and bare copper and aluminum cable and come to the site. Tell us what you have and a representative follows up with an offer.
Buying wire and cable across Orlando, Winter Park, Apopka, Sanford, Kissimmee, Ocoee, and Central Florida.
What we buy
Wire & cable we buy in Orlando
Downtown high-rises, the airport district, warehouse retrofits, and data-center builds all leave wire behind. Here's what Orlando electrical crews sell us most.
Copper building wire
THHN/THWN, feeders, and bare copper — the bulk of what comes off commercial jobs.
Aluminum wire & URD
Aluminum building wire, URD, and larger aluminum feeders from service work.
Romex / NM-B
Leftover rolls and cut-offs of common residential and light-commercial cable.
8 & 12 AWG up to MCM
Everyday 8 and 12 gauge on up through 500, 750, and 1000 kcmil (MCM) feeders.
Reels, pull-outs & cutoffs
Full and partial reels, demo pull-outs, and end-of-run cutoffs.
Stripped, unstripped & tangled
Clean stripped copper, insulated runs, crates, or a tangled scrap pile — all fine.
Who sells to us
Orlando crews and projects we buy from
We're the wire buyer Orlando electrical contractors call to clear surplus cable without hauling it to a scrap yard and waiting in line. We come to the jobsite or shop.
Electrical contractors
Clear feeder cutoffs, pull-outs, and leftover reels between and after jobs.
Data-center & tech builds
Whip and feeder surplus from server-room fit-outs around the I-4 corridor.
Commercial renovations
Cable stripped out during downtown and tourist-district remodels.
Facility & MEP upgrades
Wire freed up during panel, service, and lighting retrofits.
Demolition crews
Copper and aluminum pulled during interior and structural demo.
Warehouses & plants
In-house maintenance clearing accumulated cable and reels.
Not a drop-off yard
How we're different from a scrap yard
We're a direct buyer of commercial and contractor wire — not a public scrap yard set up for household drop-offs, and not a broker or auction listing your material for a cut.
Direct buyer
We buy your wire outright and handle the sorting and weighing on our end.
Commercial volumes
Built for contractor and project surplus — crates, reels, and pallets, not a handful of cords.
We come to you
Jobsite and shop pickups around Orlando, not a line at a public counter.
One point of contact
A representative works your offer start to finish — no runaround.
What to send
What to include about your wire
You don't need to sort or strip anything first. A rough idea of type, amount, and location is enough to start.
Type of wire
Copper, aluminum, or mixed — and insulated vs. bare if you know.
Gauge or size
Anything from 12 AWG up to 500/750/1000 MCM, or just say "assorted."
Rough quantity
Approximate weight, number of reels, crates, or a photo of the pile.
Condition
Stripped, unstripped, tangled, cutoffs, or full reels.
Pickup location
City or ZIP — Orlando, Winter Park, Apopka, Sanford, anywhere nearby.
A few photos
One or two shots of the pile, crate, or reels tell us a lot.
How it works
Selling your Orlando wire in three steps
Send details & photos
Tell us the type, rough amount, condition, and where it's located. Photos help.
We review & make an offer
A representative reviews what you sent and, if it fits, follows up with an offer to buy.
We coordinate pickup
Accept the offer and we set a pickup that works around your jobsite or shop.
Your details were sent
Thank you — your request reached us and Niko will contact you to talk through an offer. Here's a copy of what you sent:
Prefer to talk sooner? Reach us at ind.equipmentbuyer@gmail.com · +1 321-977-1194
Good to know
Orlando wire buyer FAQs
Are you a scrap yard I can drop wire off at?
No. We're a direct buyer of contractor and commercial wire, not a public scrap yard set up for walk-in household drop-offs. We arrange pickup from your Orlando jobsite, shop, or warehouse.
Do I need to strip the wire first?
No. Send it the way it comes off the job — stripped, unstripped, tangled, in crates, or on reels. We handle sorting, stripping, and weighing on our end.
What types and sizes of wire do you buy?
Copper and aluminum building wire, THHN/THWN, Romex/NM-B, feeders, and URD — from 12 and 8 AWG up through 500, 750, and 1000 kcmil (MCM). Reels, pull-outs, cutoffs, and scrap piles are all welcome.
Do you buy aluminum wire too, or only copper?
Both. We buy aluminum building wire, URD, and larger aluminum feeders along with copper. Mixed loads are fine — we sort them ourselves.
How do I get an offer for my wire in Orlando?
Fill out the short form or call or text 321-977-1194. A representative reviews every submission and follows up directly to talk through an offer, then we coordinate pickup around your Orlando-area site.
Have equipment or electrical gear too? See our sell copper & aluminum wire in Florida page, electrical surplus, or our Orlando industrial equipment buyer page. Want proof? Browse real purchases & worksites, or request an offer.